How to do the appropriate maintenance work for the fan?
Fan as a common factory equipment, for friends working in the factory will not feel unfamiliar, in fact, the fan because of the frequent and continuous work, so it is easy to have some damage, usually for the fan must do a good job of maintenance work.
The first point is the maintenance of the fan motor, the motor is the most vulnerable to damage to the rotating bearings, regular testing of the bearings and apply the appropriate grease, to ensure that it can continue to work properly. A put, the number of refueling in 1000 hours each time to meet the normal use.
The second point is the surface cleaning of the fan, especially the internal impeller cleaning is essential, in the inlet and outlet of the debris also need to be dealt with at all times to ensure that the normal operation is not affected by some odor.
The third point is the stability of the voltage, the fan needs to be used in the case of stable voltage, if the voltage fluctuation is large, or the use of temporary lines, the life of the fan is also a serious impact.
The last point is the fan storage work, in order to prevent equipment moisture, the fan in storage as far as possible to be placed in a dry environment, if it is stored in the open, the corresponding rain measures should be done. In addition, the fan transfer can not be too violent movement, to prevent the collision and the corresponding damage.
Fan as a common factory equipment, for friends working in the factory will not feel unfamiliar, in fact, the fan because of the frequent and continuous work, so it is easy to have some damage, usually for the fan must do a good job related to maintenance work to
Low noise centrifugal fan selection needs to pay attention to which points? As the fan get the wrong model specifications will jeopardize the normal application. The key performance parameters of the fan are output power, air volume and working pressure.
Before installation, all parts of the fan should be thoroughly checked. Whether the machine is complete, whether the direction of rotation of the impeller and the casing is consistent, whether the connection of each ministry is tight, whether there is damage to the impeller, spindle, bearings and other major parts, whether the transmission group is flexible and so on. If problems are found, they should be repaired and adjusted immediately.